Thread Locker M271 Red High Strength, Lock Tight Threadlocker 50ml, Thread Locking Adhesives for Sealing Metal Bolts Nuts and Anti-Rust(M271)

WARM REMINDER: The bottle is more than 1/2 empty because the threadlocker hardens in the absence of air, so filling the bottle completely would cause the glue to start hardening. The bottle is air permeable and allow air to pass through the wall. There is also some air gap over the product inside the bottle to maintain stability of threadlocker. Thus a 50 ml pack of contains 50 ml threadlocker in a much larger bottle.

WHAT CAN DO: Preventing parts loosening due to vibration that can lock and seal the metal nuts and bolts. Easy to use and clean. Can eliminate micro-vibration wear phenomenon, withstand high load and anti-rust. Applied on the threads of the nut and bolt and then it is bonded together. The threadlocking adhesive evenly between the nut and bolt and then hardens in the absence of air, locking the nut and bolt together.

USE-METHOD: 1. Clean all surfaces. 2. Shake well before use. 3. Apply sufficient product onto the bolts at the nut engagement area. If parts have come into contact with water-based solvents or cutting fluids and a protective layer is left on the surface, flush with hot water before gluing.

APPLYING: Applying fill gaps up to 0.25mm with 6 to 12 mins fixture time. Strength: high, low viscosity. Solidification time (first solidification/full solidification): 20m/24h. Service maximum temperature: 180℃. Shear strength: 3500 Lbs/inch² 24 N/mm². Viscosity at 25.0 °C spindle 1 & speed 10 rpm is around 400.0 - 600.0 mPas.

APPLICATION: The sealants are widely used in automotive for valve covers, oil pans, pumps, engine and others to extend the lifespan; at home for bicycle, motorcycle, lockset, lawn mower, hardware and so on to ensure the bolts stay in place; in shop for homemade project fix, sealing bezel, freestyle drone, desktop printer and more to improve the performance of product.