Car led Hood Lights,Multicolor 120modes (70 Inch) 12V, Engine Hood Cover Daytime Running Light Strip,Multi Color neon Light kit for car Hood

70-Inch Multicolor LED Strip — 120 Dynamic Modes, Wireless APP & Remote Control (Scan, Rainbow, Chasing, Race Light Effects)

How to Use the APP:

1. First, turn on Bluetooth on your smartphone. 2. Scan the QR code on the controller to download the app. 3. Follow the on-screen prompts to select the LED DMX interface — this is the correct mode for your lights. 4. After the initial setup, you won’t need to scan the QR code again. 5. Just open the app, ensure Bluetooth is active, and tap the Bluetooth icon in the top-left corner to reconnect. 6. The app features a brightness adjustment slider, and you can set the startup mode via the gear icon in the top-right corner. 7. There are 3 preset program banks: K1, K2, K3. 8. For the car startup scan effect: Double-tap K1 to toggle between white and blue.

Material: Advanced composite transparent construction Light Source: High-performance LED Voltage: 12V LEDs: Premium RGB LEDs for optimal brightness, vibrant color, and long‑lasting durability Custom Length: Fully cuttable to any size with no distance limitations Lumen Output: 3000LM Waterproof Rating: IP68 Length: 70 inches Lighting Effects: 120 dynamic multicolor modes

Additional: Can be trimmed to desired length Important Note: Before using the remote control, remove the clear plastic insulating tab from the battery compartment. Key Features: Sequential startup scan, breathing effect, meteor mode, scan, rainbow, streamer, chase/horse race Pro Installation Tip: For mounting above the car hood, use extra‑strength adhesive for a more secure hold.

Application Scenarios This strip can be installed anywhere inside or outside your vehicle where positive and negative power connections are available. Perfect for: Daytime Running Lights (DRL), headlight accents, door lights, tailgate lights, engine bay lights, hood lights, and footwell/pedal lights. The strip features strong, specialized double‑sided adhesive, so you can mount it on either side for flexible, bi‑directional installation.

How to Install the Light Strip 1. Connect the black wire to the negative terminal and the red wire to ACC — the lights will turn on when you start the engine. 2. Connect the black wire to the negative terminal and the red wire to the DRL circuit — the lights will activate when you turn on your daytime running lights.