Car Inner Tie Rod Boot Kit with Boot Clamp Pliers,Soft Car Rack and Pinion Boots Keeps Steering Parts Includes Ties/Clamps,Cuttable Cars Accessories Steering Rack Boots

ID Size: Tie rod end boot contains a variety of ID range (actual application range), covering 0.39", 0.78", 1.1", 1.37", 1.25", 1.49", 1.65", 1.77", support the use of cutting according to the needs, please confirm the size in advance before cutting, to avoid cutting can not be use

Avoid Wear and Tear of Components: Tie rod boots provide reliable protection for your steering system components. The flexible silicone boot keeps dust, water and other debris out of direct contact with the steering components, prolonging the service life of the steering system

Size Parameters: Rack and pinion boot total dimensions of 8.85*2.42*2.42 inch (length*diameter*diameter), the large mouth outer diameter of 1.34 inch, the small mouth outer diameter of 0.42 inch, the total length of the plier 9.33 inch, tie length of 7.8 inch

Upgrade Kit: The package contains inner tie rod boot*2, small locking clamp*2, large locking clamp*2, ties*6, boot clamp plier*1, the tie/locking clamp provide firm fixing, and the extra boot clamp plier is prepared for you, which makes it easier to fix the locking clamp

Installation Steps: Detach the aging steering rack boot, install our new steering rack boot to the original position, take out the tie-wraps to fix it or use the clamps to fix it, when locking the clamps, adjust the clamps and press firmly, use the pliers to clamp the bumps for final tightening